CNC Conversion

A forum for contacting other builders of Ken Hankinson designs. These designs are now a part of the Glen-L family.

Moderators: Bill Edmundson, billy c

Alan71
Posts: 25
Joined: Sun Jan 06, 2019 6:39 am

Re: CNC Conversion

Post by Alan71 »

Now 3 photos of the cowl/coaming

(The verbage is on the previous page.)

[img][
F48D8268-4ED1-405F-9BC6-CCED5A547152.jpeg
1F69F0F8-EB94-4C5E-8386-8BB57CF4931B.jpeg
B13F50BD-EA37-4127-9E34-0EC19F5BBC2D.jpeg
/img]

Alan71
Posts: 25
Joined: Sun Jan 06, 2019 6:39 am

Re: CNC Conversion

Post by Alan71 »

Hello Folks,

I hope you all are doing well!

I continue to make slow progress but am really slowed down by my lack of wood working skill and boat building experience . But I forge ahead because I'm having a really good time!!!

I've been working on the cowl and coaming but am pretty much finished with it for now.

I received a gas tank I ordered from a manufacturer in N.J. . It's a 12" diameter aluminum cylinder that's 28" long... about 12 gallons. I built a wooden cradle for it and it's held in place with mild steel straps I fabricated. Access to the tank is only through the opening created when the seat back slats are removed.

I also made a brace with a simple bearing for the top of the rudder shaft.

I changed the bottom of the dash to increase knee room and also have the single gauge dominate the dash. I'll still need a ignition switch, light switch, and choke.

Stay Well!
Be Safe!

Regards,
Alan
EC430FA6-865C-4121-BB14-9A5FFE6B0FAA.jpeg
6D520ABA-F3AC-4A55-AB53-A48B397B0544.jpeg
06854BAD-91D2-419B-8EFC-0C84FA8F6352.jpeg

Alan71
Posts: 25
Joined: Sun Jan 06, 2019 6:39 am

Re: CNC Conversion

Post by Alan71 »

3 more photos.
8E168355-3C68-44AF-925F-CF026D267B76.jpeg
79764E33-197C-4BB0-91EF-AE68874FC611.jpeg
FBE3BC19-5B18-4D46-A636-FDFA183F6A03.jpeg

JimmY
Posts: 1264
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: CNC Conversion

Post by JimmY »

Very nice progress.
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

Post Reply

Return to “Hankinson designs”