Before going to all the trouble to register and create a photobucket (et al) web page
PLEASE FIRST SEND YOUR PHOTOS TO firstname.lastname@example.org as JPEGs so that we can immediately post your photos on the Glen-L.com website -
See John Brantuk's post below)
I know that versions of these instructions have been posted many times, but I can never seem to find them a new forum member asks about how to post photos.
Here is what you need to do:
You must first post your photo somewhere on the internet. Then, In your Glen-L forum post, you "tag" a link to that image.
A "tag" is a set of codes that tells your post how to behave.
- Each tag has an "open" ( [?] )and a "close" ( [/?] ).
You can either type the tags or add them using the buttons above the message window.
When you are typing or editing your message, you see the tags, but when you "preview" your post, you see how it will look after you submit it. (you do not see the tags then)
- and a web link (URL),
add a link to a photo (Img),
make a list (I am using that one now),
make text bold,
Here is how I do it for photos:
First time only...
Go to a site like www.photobucket.com and register.
Assume you have a digital photo in a folder on your computer.
Also, Assume you will have one window open for the glen-l forum, and one window open for Photobucket.
A] Get your photo posted on the Photobucket site
1) go to Photobucket and log in
2) follow unstructions to upload your photo to your Photobucket album
B] Find and copy the photo's new URL
3) once the photo is uploaded, "double click" on it to bring it to full size
4) "right click" on the photo, and call up the "properties"
5) In the "properties" window, locate the "Address (URL)".
6) Highlight the address "http://......... .jpg". (Leave out the codes after ".jpg")
7) type "Ctrl-C" to copy that address
C] Create a link to that photo in your Glen-L Forum post
8) switch to your Glen-L forum window, and to the entry where you want to add the photo.
9) hit the "Img" tag button just above the text window. (the button will place the "open image link" tag in your post, and will change the button to "Img*")
10) type "Ctrl-V" to paste the location of your photo
11) hit the "Img*" tag button to complete the link. (this button adds the "close image link" tag, and change the button back to "Img")
12) When that is done, you should see something like this sample:
- "[Image]http://i241.photobucket.com/albums/ff7/ ... /gemma.jpg[/Image]"
(except that it says "Img" instead of "Image" inside the square brackets)
14) finish typing your comments, and "Submit" your post.