Search found 7180 matches

by Roberta
Thu Jul 29, 2021 5:00 am
Forum: Hankinson designs
Topic: Key Largo Build in Charleston
Replies: 324
Views: 147466

Re: Key Largo Build in Charleston

Hope you make the Gathering.

Roberta :D
by Roberta
Wed Jul 28, 2021 2:24 pm
Forum: Hankinson designs
Topic: Key Largo Build in Charleston
Replies: 324
Views: 147466

Re: Key Largo Build in Charleston

I was under the impression that they were welded on the end of the tip on the the edge. Now I understand that you are tacking them inside the tube at the end, keeping them flush with the end of the tube. I don't see that as a problem. I misunderstood how you were doing it. You should be fine with yo...
by Roberta
Wed Jul 28, 2021 10:10 am
Forum: Hankinson designs
Topic: Key Largo Build in Charleston
Replies: 324
Views: 147466

Re: Key Largo Build in Charleston

I wasn't sure if the rubber flapper would clear the decorative cover opening. But you could trim the flapper, if necessary. If they work out, they should be quieter. A short tack bead in 3 or 4 spots should secure them. That will keep the heat down.

Roberta :D
by Roberta
Tue Jul 27, 2021 3:48 pm
Forum: Power Boats
Topic: Mai Tai on wheels at last
Replies: 5
Views: 126

Re: Mai Tai on wheels at last

Looks great!

Roberta :D
by Roberta
Tue Jul 27, 2021 3:47 pm
Forum: Power Boats
Topic: Engine/Transmission For A Crackerbox Build?
Replies: 5
Views: 129

Re: Engine/Transmission For A Crackerbox Build?

Welcome aboard! The Crackerbox is a popular boat and many builders will chime in to help. Ask away and post pictures.

Roberta :D
by Roberta
Tue Jul 27, 2021 1:02 pm
Forum: Hankinson designs
Topic: Key Largo Build in Charleston
Replies: 324
Views: 147466

Re: Key Largo Build in Charleston

Here's one more. Maybe sturdier, but maybe noisier. Could be installed anywhere inline in the hose.

https://www.hardin-marine.com/p-109755- ... -pair.aspx

Roberta
by Roberta
Tue Jul 27, 2021 12:51 pm
Forum: Hankinson designs
Topic: Key Largo Build in Charleston
Replies: 324
Views: 147466

Re: Key Largo Build in Charleston

Here is one other idea that is similar to what you were looking at and slips under the hose with no cutting, drilling or welding.

https://www.hardin-marine.com/p-22464-4 ... steel.aspx

Roberta
by Roberta
Tue Jul 27, 2021 12:09 pm
Forum: Hankinson designs
Topic: Key Largo Build in Charleston
Replies: 324
Views: 147466

Re: Key Largo Build in Charleston

Actually you might be able to drill the holes for the pins and capture the assembly with the hose and clamps if you install them in the tubes as shown in the add. There would be no leakage because the hose clamped over the assembly would seal any leakage from the pin holes. Metal flue tape could be ...
by Roberta
Tue Jul 27, 2021 11:11 am
Forum: Hankinson designs
Topic: Key Largo Build in Charleston
Replies: 324
Views: 147466

Re: Key Largo Build in Charleston

I'm not sure those would work under our Vetus tips. Here is a design that could replace the plastic flapper we have and could be modified to fit in the slots the plastic flapper goes or could be welded in the SS tube behind tip.

https://www.summitracing.com/parts/edm-100-32

Roberta
by Roberta
Mon Jul 26, 2021 10:08 am
Forum: Hankinson designs
Topic: FL Tahoe 23
Replies: 37
Views: 7678

Re: FL Tahoe 23

Looking Great.

Roberta :D
by Roberta
Mon Jul 26, 2021 5:09 am
Forum: Hankinson designs
Topic: Key Largo Build in Charleston
Replies: 324
Views: 147466

Re: Key Largo Build in Charleston

You could try epoxying a pin on the old ones. Grind off the nibs and rough the surface up. It could be that slug of water that gets puked out is too much for those plastic nibs. Otherwise there are metal ones that can be modified. Or maybe make your own. I think I was lucky my system tolerates the b...
by Roberta
Sun Jul 25, 2021 4:53 pm
Forum: Gathering 2021
Topic: G15 Dates and Location
Replies: 93
Views: 20200

Re: G15 Dates and Location

We will miss you, Bob. Any chance of you going to the International ACBS Show in Coeur d'Alene in September? Rich and I are flying out there.

Roberta :D
by Roberta
Sun Jul 25, 2021 12:23 pm
Forum: New Members, Please Introduce Yourself
Topic: new the forum and first time boat builder
Replies: 94
Views: 20008

Re: new the forum and first time boat builder

Your picture did not appear.

Roberta
by Roberta
Sat Jul 24, 2021 11:28 am
Forum: Power Boats
Topic: Building The Vera Cruise
Replies: 3587
Views: 972303

Re: Building The Vera Cruise

Beautiful!

Roberta :D :D :D :D :D :D
by Roberta
Sat Jul 24, 2021 4:52 am
Forum: Boat Videos
Topic: Seattle Barrelback test run
Replies: 7
Views: 194

Re: Seattle Barrelback test run

Beautiful.

Roberta :D :D :D :D

Go to advanced search