A Zippy High Speed Deluxe Classic Sport Runabout
"Using a handheld GPS or the GPS app on my cell phone I have recorded a consistent top speed between 32 and 33 mph when I’m driving solo. The boat handles like a dream..."—From article in WoodenBoat magazine's Small Boats.
ZIP is a high speed, deluxe sport runabout in the classic style. She furnishes all of the flashing speed, thrills, and performance that one could hope for. Ideally suited for towing water skiers or showing the local lads a clean pair of heels ZIP can also be finished as a utility with a large open cockpit for fishing or general use. With her flaring sides, she is very dry. The bottom design allows for quick starts and excellent performance, with a generous vee forward to cushion the ride. A roomy 5'-9" beam assures stability.
COMPLETE PLANS include FULL SIZE PATTERNS for the stem, breasthook, transom knee, and half-section patterns for each of the frames and transom. Includes instructions and Bill of Materials.
*Zip will require approximately 8 sheets of 1/4" and 1 sheet of 3/4" plywood (4x8), but click on the Materials tab above to download the detailed Bill of Materials.
Please note: Plywood ZipKits are no longer being offered at this time. Builders will need to build from plans and patterns.
- Length overall:
- 14'-4"
- Beam:
- 5'-9"
- Hull depth:
- 27"
- Average passengers:
- 2-4
- Hull weight (approx.):
- 375 lbs.
- Hull type:
- Vee bottom hard chine hull developed for sheet plywood planking.
- Power:
- Short shaft outboard motor to 40 hp. Long shaft motor can be used if transom modified.
- Can the hull be extended or shortened?:
- Extend: No. Shorten: Yes, up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.
- Trailer:
- Designed for use with Glen-L Series 1000 boat trailer plans.
