Screws or Nails for 4MM Plywood

Canoes, Kayaks, Pedal power

Moderator: BruceDow

Post Reply
bkiley
Posts: 52
Joined: Sun Sep 16, 2007 2:56 pm

Screws or Nails for 4MM Plywood

Post by bkiley »

Hi,

I'm building the kanyak and picked up some very nice Okoume. The plans call for screws, but I was wondering if I could use stainless brads in my nailer. I'm going to epoxy it in place anyways, so i was looking for options.

Thoughts?

User avatar
Bill Edmundson
Posts: 12058
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Screws or Nails for 4MM Plywood

Post by Bill Edmundson »

You are probably fine using the brads. But, I would use screws at the end of the bend. You don't want to turn your back and have it pop before the epoxy goes off.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
thudpucker
Posts: 1291
Joined: Sun Dec 07, 2008 3:31 pm
Location: Cullman AL

Re: Screws or Nails for 4MM Plywood

Post by thudpucker »

Could you use Stainless Staples? You'd need an Air powered stapler. Just leave them in place.

Post Reply

Return to “Human Power”