Christmas present……….some assembly required ! !

Canoes, Kayaks, Pedal power

Moderator: BruceDow

TomB
Posts: 930
Joined: Wed Jan 18, 2017 4:07 pm
Location: Holland, MI

Re: Christmas present……….some assembly required ! !

Post by TomB »

Ken,

If you go that way, bias cut the fabric so it lays over the edges better. What time is lunch? We don't want to be late. :wink: :wink:

Tom
In the home stretch on a Tahoe 23

User avatar
kens
Posts: 5008
Joined: Wed Nov 12, 2003 5:25 pm
Location: Coastal Georgia

Re: Christmas present……….some assembly required ! !

Post by kens »

yes, I did the bias cut on the bow ends of the canoe, regular fabric, just bias cut it for the ends, it forms tight curves very well.
I got a little bit of scuffing on bottom of the bow, scuffs from mostly concrete boat ramp beaching.
local boat ramp access does not have any soft spot to park the canoe.
Oak is over rated, everything about it takes extra time; then it warps, splits or checks !!! :roll:

Post Reply

Return to “Human Power”