Plan on building boat using the geodesic frame design

Canoes, Kayaks, Pedal power

Moderator: BruceDow

Post Reply
Doug in the woods
Posts: 6
Joined: Sun Jun 18, 2006 11:38 am
Location: Salmon, Idaho
Contact:

Plan on building boat using the geodesic frame design

Post by Doug in the woods »

anyone here build such a boat?
the online plans show a boat that weighs 30 pounds but will hold 500+
these boats are built similar to a fabric covered airplane.
Have designed a pontoon boat using SKETCHUP 5 w/ 2 pontoons but can be converted to a 3 pontoon boat.
My question is has anyone had experience building such a boat?
planning on 12' long pontoons that are joined together using 1/4" plywood.
somehow attach wheels so boat can be assembled on shore (boat will be very light and easy to carry on top of car)then wheeled to the water. remove wheels and go fishing.
just need some good epoxy, dacron fabric. have all the wood needed.
Ideas in wood become reality

Eric
Posts: 68
Joined: Wed Aug 10, 2005 4:40 pm

Post by Eric »

Monfort Platt desinged and built many of these. Unfortunatly Monfort passed away last year but I think his plans are still out there.

Aircraft Spruce in Washington has the dacron you will need.

Post Reply

Return to “Human Power”